Toilet Replacement

shadow

Nobody wants to own an old toilet that is leaky or damaged. If problems with your toilet start occurring on a regular basis, it’s best to replace it. That way, you can prevent further damage to other structures and save yourself the cost of continual repairs.

Replacing a toilet might require professional help, but it can also be done relatively easily at home if you know what you’re doing. The following tips and steps will inform you of things to consider before attempting to make toilet replacement a do-it-yourself-project. They will also help make the replacement process as easy as possible if you choose to do it on your own.

Reasons You Should Replace Your Toilet

There are several reasons that you should replace your toilet, the first of which is spending too much on repairs. If you notice recurring clogs in your toilet that are severe enough that it takes a plumber to fix them, then you are almost literally flushing your money down the toilet. It would be more cost-efficient in the long run to go ahead and replace it.

Age and high levels of maintenance are further reasons to replace your toilet. If your toilet is very old and requires plunging twice or more times a week, it’s time to get a new one.

You may also want to replace the toilet if its handles, fill valve, or other parts require frequent repairs. If the surface of the toilet is cracked or you find it is hard to clean because there are too many scratches, replacement is again your best bet.

Saving water is another good reason to replace an old or malfunctioning toilet because a new, properly functioning toilet will require fewer flushes.

Doing it Yourself Vs. Hiring a Professional Plumber

When it comes to deciding whether to replace your toilet yourself or hire a plumber to do it, it all depends on how experienced you are at handling plumbing related tasks. If you have a good understanding of plumbing and possess the necessary tools, you can probably follow the tips below for an easy installation. However, it is a good idea to hire a plumber if you are short on time or feel you lack the necessary tools and experience.

The Step-By-Step Guide for Do-It-Yourself Toilet Replacement

1. Turn off the Water Supply

It is important to turn off the water supply and remove the connection to it before starting. Flush the toilet several times so that there is no water left inside the tank. Lastly, use a plunger to flush as much water  as possible from the bowl.

2. Remove the Tank

Remove the bolts that connect the tank to the bowl, then gently lift the tank to remove it.

3. Lift the Seat

Remove all the bolts that connect the seat to the floor. Following this, gently lift the seat to remove it from its place.

4. Prepare the New Seat

Get the new toilet seat ready by removing the old bolts from the flange and cleaning the wax seal.

5. Inspect the Wax Seal

Find out whether the wax seal or the flange below it are damaged or require replacement. Once they are confirmed to be in working order, put them in their previous positions and continue installing the new toilet.

6. Place the New Seat

Firmly place the new toilet seat so that the anchor bolts are placed such that they will fix at the base of the toilet.

7. Fix the Bolts

Seal the wax ring and tighten all the bolts.

8. Place the Tank

At this point, you should gently place the tank over the new bowl and fix the bolts to keep it in place.

9. Install the Valve Assembly

The valve assembly inside the tank may be pre-installed. If not, you can assemble it yourself by following the manual that comes with it.

10. Connect the New Toilet

Once the above steps have been completed, you can chalk the base of the bowl and reconnect the water supply line. Flush the toilet a few times to ensure that there are no leaks.

Apart from reading through these 10 steps, it’s  a great idea to read the manufacturer’s manual before installing your new toilet. Their manual can help you understand the specifics of the particular model you will be working with. That said, it is advisable to call a plumber if you continue to experience leaks and other plumbing issues after the install or have complications completing it in the first place.

Author

Dan