Toilet Repairs


When it comes to the calls that plumbers receive, those regarding toilet problems are the most common. This isn’t surprising considering how important a properly functioning toilet is to daily life and the damage that can occur when it stops working. If your toilet runs continuously, backs up, does not flush, or starts to leak, it probably needs to be fixed immediately. Even if the issue with your toilet hasn’t fully stopped it from working, you could be losing a lot of money from wasted water. The toilet may not be anyone’s favorite thing to fix, but it can be one of the easiest. Check out the following tips and you’ll be well upon your way to solving your problems.

Clogging is Common

Keep in mind that a clogged toilet is a common problem and it’s something that can happen frequently. Toilets can clog if they aren’t flushing properly or there is a blocked pipe. Your first course of action should involve using a plunger to dislodge the clog. This will fix the majority of smaller blockages.

If the plunger doesn’t work, it’s time to try using a plumber’s snake. This tool will get more deeply into the pipes and help dislodge or remove any blockages. If the plumber’s snake does not work, however, you may have to call an actual plumber.

To prevent clogs from reoccurring, you should keep a close eye on what you flush down the toilet. If you have children and your toilet seems to clog regularly, see if they’ve been putting something in the toilet that they shouldn’t.

Leaks are Complex

The source of toilet leaks can be difficult to diagnose and the leaks themselves can be just as hard to fix. The leak could be coming from the incoming plumbing, tank condensation, a jarred toilet bowl, or a broken toilet gasket.

As such, you must carefully examine your leaky toilet and try to find exactly where the water is coming from. Visually inspect the pipes and check for condensation. If you notice leaks from the pipes in the back, make sure you replace them. If you can’t see where the water is coming from after a thorough inspection, seek help from a plumber.

Nothing Lasts Forever

Toilets aren’t designed to last indefinitely. The rubber and silicone seals degenerate over time. Luckily, replacing these seals is one of the easiest toilet repair tasks and you will very likely be able to do it yourself.

Start by removing the back lid of the tank. It’s usually the seal in the toilet valve that causes water to go into the toilet after it has been filled. Alternatively, the ball cock, flap, or chain may have been damaged. In any case, it should be easy to tell what’s wrong just by looking under the tank lid. Always remember to shut off the water before you remove any of your toilet’s parts. For best results, take the faulty parts to a home improvement store and match them up with new replacement parts.

You can definitely try fixing your toilet if you feel the issues at hand are minor. It usually costs around $30 to fix it yourself, which is less than an expensive visit from the plumber. If you find that you can’t fix your toilet’s issues on your own, however, you should seriously consider calling a professional. The cost of a plumber will pale in comparison to the cost of untreated leaks and clogs.